Welcome to the Academy.
... 
... 
... ... 
I want to be a HMG Poster
Moderator: Rathinagiri
-
edufloriv
- Posts: 131
- Joined: Thu Nov 08, 2012 3:42 am
- DBs Used: DBF, MariaDB
- Location: PERU
- Has thanked: 1 time
- Been thanked: 4 times
Hi Dominique,
Welcome from Perú.
It is good to know that there is someone who started with Basic, like me !. We did make our own index files! that was crazy. Then QBasic and later Clipper 5.2
Here in HMG you will find the valious support of the HMG's experts, they help us a lot, I am using HMG about 10 years and really it is very efficent.
Best regards,
Welcome from Perú.
It is good to know that there is someone who started with Basic, like me !. We did make our own index files! that was crazy. Then QBasic and later Clipper 5.2
Here in HMG you will find the valious support of the HMG's experts, they help us a lot, I am using HMG about 10 years and really it is very efficent.
Best regards,
Eduardo Flores Rivas
LIMA - PERU
-
serge_girard
- Posts: 2042
- Joined: Sun Nov 25, 2012 2:44 pm
- DBs Used: 1 MySQL - MariaDB
2 DBF - Location: Belgium
- Has thanked: 391 times
- Been thanked: 89 times
- Contact:
In 1984 I wrote a book on the ZX Spectrum:
https://spectrumcomputing.co.uk/index. ... d=2000638
Seems like ages ago....
Serge
https://spectrumcomputing.co.uk/index. ... d=2000638
Seems like ages ago....
Serge
-
dominique_devuyst
- Posts: 11
- Joined: Wed Dec 20, 2017 8:29 am
- DBs Used: DBF
- Location: Belgium
- Has thanked: 10 times
Thanks Eduardo,
Our own index files .. my god, yes, we did that indeed!
On a Apple II... with 2 floppies.
Our own index files .. my god, yes, we did that indeed!
On a Apple II... with 2 floppies.
edufloriv wrote: ↑Sat Jan 13, 2018 3:03 pmHi Dominique,
Welcome from Perú.
It is good to know that there is someone who started with Basic, like me !. We did make our own index files! that was crazy. Then QBasic and later Clipper 5.2
Here in HMG you will find the valious support of the HMG's experts, they help us a lot, I am using HMG about 10 years and really it is very efficent.
Best regards,
Hi all, In early 80`s I could not afford or get a pos system. had to create files and indexs COMMODORE 64.
Franco,
Franco,
-
ROBROS
- Posts: 93
- Joined: Thu May 25, 2017 6:30 pm
- DBs Used: DBF
- Has thanked: 38 times
- Been thanked: 7 times
Hi Dominique,
welcome from Rosenheim, Bavaria. My first owned computer was the TI 99/4a. The cpu was the TMS 9900, the first 16 bit chip at a time when even 8088-PC's had an 8 bit chip. Pitifully, the 16 bit were only utilised inside the cpu, data exchange with memory and graphics etc. was done by only 8 bit.
Of course BASIC (TI EXTENDED BASIC) was my first experience with programming, later a c99-compiler (by Clint Pulley from the States) was my choice. My son and I had made a lap counter for CARRERA racing with joystick-micro-switches. But BASIC was too slow, when the cars reached the switch at the same (or almost same) time, BASIC counted only the lap of one car. c99 was the solution (an executable runtime file was the result of the compiler).
Then came TI-BASE (yet relational, but without index files). It came with an "interpreted" programming language very similar to dBase. So I learned to understand how databases work and on my PC at work I programmed some useful programs with dBase. The biggest project was a program to administer devices we give to our customers on a rental base.
And then 16 bit programs were abandoned by Microsoft. I could use XBase++ but only text oriented. Being used to @say,get, the GUI remained a mystery to me.
Last year I installed HMG 3.4.4 on my Computer. But if I hadn't joined HMG-Forum I would sure have given up.
This forum has helped me always and thanks to the help of the forum (I'd like to mention the help from your country fellow man Serge specially) I am able to program in HMG.
I hope these lines are not too boring.
I like HMG and as mentioned before the possibilities are only limited by our imagination.
Robert
welcome from Rosenheim, Bavaria. My first owned computer was the TI 99/4a. The cpu was the TMS 9900, the first 16 bit chip at a time when even 8088-PC's had an 8 bit chip. Pitifully, the 16 bit were only utilised inside the cpu, data exchange with memory and graphics etc. was done by only 8 bit.
Of course BASIC (TI EXTENDED BASIC) was my first experience with programming, later a c99-compiler (by Clint Pulley from the States) was my choice. My son and I had made a lap counter for CARRERA racing with joystick-micro-switches. But BASIC was too slow, when the cars reached the switch at the same (or almost same) time, BASIC counted only the lap of one car. c99 was the solution (an executable runtime file was the result of the compiler).
Then came TI-BASE (yet relational, but without index files). It came with an "interpreted" programming language very similar to dBase. So I learned to understand how databases work and on my PC at work I programmed some useful programs with dBase. The biggest project was a program to administer devices we give to our customers on a rental base.
And then 16 bit programs were abandoned by Microsoft. I could use XBase++ but only text oriented. Being used to @say,get, the GUI remained a mystery to me.
Last year I installed HMG 3.4.4 on my Computer. But if I hadn't joined HMG-Forum I would sure have given up.
This forum has helped me always and thanks to the help of the forum (I'd like to mention the help from your country fellow man Serge specially) I am able to program in HMG.
I hope these lines are not too boring.
I like HMG and as mentioned before the possibilities are only limited by our imagination.
Robert
-
serge_girard
- Posts: 2042
- Joined: Sun Nov 25, 2012 2:44 pm
- DBs Used: 1 MySQL - MariaDB
2 DBF - Location: Belgium
- Has thanked: 391 times
- Been thanked: 89 times
- Contact:
The best I can do is to convince new-comers that HMG is great...
Serge
Serge