Hi :
Firefox creates a transaction with the FTP server, it responds with a LOGIN
when trying to enter the username and password responds with a 503 error logging
No error Harbour as Firefox or any other browser is the same.
did tell me how to create the new account; but where registration requests to that server know your requirements and Connection
Ftp @ in username problem
Moderator: Rathinagiri
- danielmaximiliano
- Posts: 2612
- Joined: Fri Apr 09, 2010 4:53 pm
- Location: Argentina
- Contact:
Re: Ftp @ in username problem
*´¨)
¸.·´¸.·*´¨) ¸.·*¨)
(¸.·´. (¸.·` *
.·`. Harbour/HMG : It's magic !
(¸.·``··*
Saludos / Regards
DaNiElMaXiMiLiAnO
Whatsapp. := +54901169026142
Telegram Name := DaNiElMaXiMiLiAnO
¸.·´¸.·*´¨) ¸.·*¨)
(¸.·´. (¸.·` *
.·`. Harbour/HMG : It's magic !
(¸.·``··*
Saludos / Regards
DaNiElMaXiMiLiAnO
Whatsapp. := +54901169026142
Telegram Name := DaNiElMaXiMiLiAnO
Re: Ftp @ in username problem
Hi
And sorry, the GOODACCOUNTNAME and NOTGOODACCOUNTNAME was only ment to make a statement
ftp://Eldemo@johnsjn22.twentytwo.axc.nl ... two.axc.nl
working in Chrome 34.0.1847.137 m
not working in IE 11
( can someone please confirm ? )
so also some browsers have problem with the @ i think
attach screenshot ftp
as you can see very simple,
only thing is,
@johnsjn22.twentytwo.axc.nl is forced as part of the username
Thanks and greetings...
And sorry, the GOODACCOUNTNAME and NOTGOODACCOUNTNAME was only ment to make a statement
ftp://Eldemo@johnsjn22.twentytwo.axc.nl ... two.axc.nl
working in Chrome 34.0.1847.137 m
not working in IE 11
( can someone please confirm ? )
so also some browsers have problem with the @ i think
attach screenshot ftp
as you can see very simple,
only thing is,
@johnsjn22.twentytwo.axc.nl is forced as part of the username
Thanks and greetings...
- Attachments
-
- ftp.jpg (28.02 KiB) Viewed 4365 times
Re: Ftp @ in username problem
Hi all,
I still think the
/* Comprobamos si el usuario contiene una @ para forzar el userid */
IF At( "@", cUser ) > 0
oFTP:oUrl:cServer := cServer
oFTP:oUrl:cUserID := cUser
oFTP:oUrl:cPassword := cPassword
ENDIF
is a bug in the above code .OR. in the tipclient source ?
The code is in several samples in the contrib dir and seen some times in this forum,
is there anyway a solution for the future ?
(i wish i could do myself, but i am just beginner)
Otherwise i must forget it...
Thanks and Greetings...
I still think the
/* Comprobamos si el usuario contiene una @ para forzar el userid */
IF At( "@", cUser ) > 0
oFTP:oUrl:cServer := cServer
oFTP:oUrl:cUserID := cUser
oFTP:oUrl:cPassword := cPassword
ENDIF
is a bug in the above code .OR. in the tipclient source ?
The code is in several samples in the contrib dir and seen some times in this forum,
is there anyway a solution for the future ?
(i wish i could do myself, but i am just beginner)
Otherwise i must forget it...
Thanks and Greetings...
- danielmaximiliano
- Posts: 2612
- Joined: Fri Apr 09, 2010 4:53 pm
- Location: Argentina
- Contact:
Re: Ftp @ in username problem
Demo Code FTPclient.prg
No es un Bug dentro de la libreria HBTIP.
sucede que es un error de sitio que asume como nombre de usuario
normalmente esa URL se decompone de esta manera.
posiblemente Google Web Browse busca : para decomponer
Translate Google
Not a Bug HBTIP within the library.
happens to be a site that takes error as username
Eldemo@johnsjn22.twentytwo.axc.nl
URL that usually decomposes in this way.
See : C:\harbour\contrib\hbtip\url.prg
and FTPClient HBTIP library
is logical and correct treatment of the URL within the library.
a modification to that library to make it compatible with URL like this.
ftp://Eldemo@johnsjn22.twentytwo.axc.nl ... two.axc.nl
sucede que es un error de sitio que asume como nombre de usuario
normalmente esa URL se decompone de esta manera.
posiblemente Google Web Browse busca : para decomponer
Translate Google
Not a Bug HBTIP within the library.
happens to be a site that takes error as username
Eldemo@johnsjn22.twentytwo.axc.nl
URL that usually decomposes in this way.
Browse possibly Google Web searching ":" to decompose/*
* An URL:
* http://gian:passwd@www.niccolai.ws/mypa ... =0&avar1=1" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
* ^--^ ^--^ ^----^ ^-------------^ ^----------------------^ ^------------^
* cProto UID PWD cServer cPath cQuery
* ^------------^ ^-------^
* cDirectory cFile
* ^--^ ^--^
* cFname cExt
*/
See : C:\harbour\contrib\hbtip\url.prg
and FTPClient HBTIP library
Code: Select all
METHOD New( oUrl, xTrace, oCredentials ) CLASS TIPClientFTP
::super:new( oUrl, iif( HB_ISLOGICAL( xTrace ) .AND. xTrace, "ftp", xTrace ), oCredentials )
::nDefaultPort := 21
::nConnTimeout := 3000
::bUsePasv := .T.
::nAccessMode := TIP_RW // a read-write protocol
::nDefaultSndBuffSize := 65536
::nDefaultRcvBuffSize := 65536
// precompilation of regex for better prestations
::RegBytes := hb_regexComp( "\(([0-9]+)[ )a-zA-Z]" )
::RegPasv := hb_regexComp( "([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*)" )
RETURN Self
METHOD Open( cUrl ) CLASS TIPClientFTP
IF HB_ISSTRING( cUrl )
::oUrl := TUrl():New( cUrl )
ENDIF
IF Len( ::oUrl:cUserid ) == 0 .OR. Len( ::oUrl:cPassword ) == 0
RETURN .F.
ENDIF
IF ! ::super:Open()
RETURN .F.
ENDIF
IF ::GetReply()
::inetSendAll( ::SocketCon, "USER " + ::oUrl:cUserid + ::cCRLF )
IF ::GetReply()
::inetSendAll( ::SocketCon, "PASS " + ::oUrl:cPassword + ::cCRLF )
// set binary by default
IF ::GetReply() .AND. ::TypeI()
RETURN .T.
ENDIF
ENDIF
ENDIF
RETURN .F.
a modification to that library to make it compatible with URL like this.
ftp://Eldemo@johnsjn22.twentytwo.axc.nl ... two.axc.nl
*´¨)
¸.·´¸.·*´¨) ¸.·*¨)
(¸.·´. (¸.·` *
.·`. Harbour/HMG : It's magic !
(¸.·``··*
Saludos / Regards
DaNiElMaXiMiLiAnO
Whatsapp. := +54901169026142
Telegram Name := DaNiElMaXiMiLiAnO
¸.·´¸.·*´¨) ¸.·*¨)
(¸.·´. (¸.·` *
.·`. Harbour/HMG : It's magic !
(¸.·``··*
Saludos / Regards
DaNiElMaXiMiLiAnO
Whatsapp. := +54901169026142
Telegram Name := DaNiElMaXiMiLiAnO
Re: Ftp @ in username problem
Hi all,
First, thank you ver much for your work and time
Get error when building,
using the default build.bat from HMG
Or is it need to build new library ?
( i have no idea how to do )
***
Harbour 3.2.0dev (r1312060701)
Copyright (c) 1999-2013, http://harbour-project.org/" onclick="window.open(this.href);return false;
main.prg(76) Error E0030 Syntax error "syntax error at 'NEW'"
main.prg(93) Error E0030 Syntax error "syntax error at 'OPEN'"
2 errors
No code generated.
hbmk2[main]: Error: Running Harbour compiler (embedded). 1
(v:\hmg\harbour\bin\harbour.exe) -n2 main.prg ftp.prg -DHBMK_HAS_HMG=1 -q -oC:\Users\HP\AppData\Local\Temp\hbmk_6q0j5m.dir\ -iv:\hmg\harbour\include -i. -iv:\hmg\include
***
Complete code:
***
#include 'hmg.ch'
#define DISABLE 0
#define ENABLE 1
#define CRLF INetCRLF()
#require "hbtip"
REQUEST __HBEXTERN__HBSSL__
REQUEST HB_GT_WIN_DEFAULT
/*****************************************************************************/
Function Main
/*****************************************************************************/
Public cUSER := ""
Public cSERVER := ""
Public cPASSWORD := ""
Public aFiles
Public cUrl
Public cStr
Public lRetVal := .T.
Public oUrl
Public oFTP
Public cFile := ""
Public lTrace := .T.
SET MULTIPLE OFF
SET NAVIGATION EXTENDED
SETMODE( 25, 80 )
cServer := "ftp://johnsjn22.twentytwo.axc.nl"
cUser := "Eldemo@johnsjn22.twentytwo.axc.nl"
cPassword := "12345"
cUrl := cServer
oUrl := TUrl():New( cUrl )
oFTP := TIPClientFTP():New( oUrl, .T. )
oFTP:nConnTimeout := 20000
oFTP:bUsePasv := .F.
IF At( "@", cUser ) > 0
oFTP:oUrl:cServer := cServer
oFTP:oUrl:cUserID := cUser
oFTP:oUrl:cPassword := cPassword
ENDIF
IF oFTP:Open( cUrl )
aFiles := Directory( "SelectAFile\*.*" )
IF Len( aFiles ) > 0
FOR EACH cFile IN afiles
? "Filename: " + cFile[ F_NAME ]
IF ! oFtp:UploadFile( cFile[ F_NAME ] )
lRetVal := .F.
EXIT
ELSE
lRetVal := .T.
ENDIF
NEXT
ENDIF
oFTP:Close()
ELSE
MsgBox( "Could not connect to FTP server " , oURL:cServer )
IF oFTP:SocketCon == NIL
cStr += hb_eol() + "Connection not initialized"
ELSEIF hb_inetErrorCode( oFTP:SocketCon ) == 0
cStr += hb_eol() + "Server response:" + " " + oFTP:cReply
ELSE
cStr += hb_eol() + "Error in connection:" + " " + hb_inetErrorDesc( oFTP:SocketCon )
ENDIF
? cStr
lRetVal := .F.
ENDIF
RETURN lRetVal
*---------------------------------------------------------------------------*
METHOD New( oUrl, xTrace, oCredentials ) CLASS TIPClientFTP
::super:new( oUrl, iif( HB_ISLOGICAL( xTrace ) .AND. xTrace, "ftp", xTrace ), oCredentials )
::nDefaultPort := 21
::nConnTimeout := 3000
::bUsePasv := .T.
::nAccessMode := TIP_RW // a read-write protocol
::nDefaultSndBuffSize := 65536
::nDefaultRcvBuffSize := 65536
// precompilation of regex for better prestations
::RegBytes := hb_regexComp( "\(([0-9]+)[ )a-zA-Z]" )
::RegPasv := hb_regexComp( "([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*)" )
RETURN Self
METHOD Open( cUrl ) CLASS TIPClientFTP
IF HB_ISSTRING( cUrl )
::oUrl := TUrl():New( cUrl )
ENDIF
IF Len( ::oUrl:cUserid ) == 0 .OR. Len( ::oUrl:cPassword ) == 0
RETURN .F.
ENDIF
IF ! ::super:Open()
RETURN .F.
ENDIF
IF ::GetReply()
::inetSendAll( ::SocketCon, "USER " + ::oUrl:cUserid + ::cCRLF )
IF ::GetReply()
::inetSendAll( ::SocketCon, "PASS " + ::oUrl:cPassword + ::cCRLF )
// set binary by default
IF ::GetReply() .AND. ::TypeI()
RETURN .T.
ENDIF
ENDIF
ENDIF
RETURN .F.
*---------------------------------------------------------------------------*
***
Thanks and greetings...
First, thank you ver much for your work and time
Get error when building,
using the default build.bat from HMG
Or is it need to build new library ?
( i have no idea how to do )
***
Harbour 3.2.0dev (r1312060701)
Copyright (c) 1999-2013, http://harbour-project.org/" onclick="window.open(this.href);return false;
main.prg(76) Error E0030 Syntax error "syntax error at 'NEW'"
main.prg(93) Error E0030 Syntax error "syntax error at 'OPEN'"
2 errors
No code generated.
hbmk2[main]: Error: Running Harbour compiler (embedded). 1
(v:\hmg\harbour\bin\harbour.exe) -n2 main.prg ftp.prg -DHBMK_HAS_HMG=1 -q -oC:\Users\HP\AppData\Local\Temp\hbmk_6q0j5m.dir\ -iv:\hmg\harbour\include -i. -iv:\hmg\include
***
Complete code:
***
#include 'hmg.ch'
#define DISABLE 0
#define ENABLE 1
#define CRLF INetCRLF()
#require "hbtip"
REQUEST __HBEXTERN__HBSSL__
REQUEST HB_GT_WIN_DEFAULT
/*****************************************************************************/
Function Main
/*****************************************************************************/
Public cUSER := ""
Public cSERVER := ""
Public cPASSWORD := ""
Public aFiles
Public cUrl
Public cStr
Public lRetVal := .T.
Public oUrl
Public oFTP
Public cFile := ""
Public lTrace := .T.
SET MULTIPLE OFF
SET NAVIGATION EXTENDED
SETMODE( 25, 80 )
cServer := "ftp://johnsjn22.twentytwo.axc.nl"
cUser := "Eldemo@johnsjn22.twentytwo.axc.nl"
cPassword := "12345"
cUrl := cServer
oUrl := TUrl():New( cUrl )
oFTP := TIPClientFTP():New( oUrl, .T. )
oFTP:nConnTimeout := 20000
oFTP:bUsePasv := .F.
IF At( "@", cUser ) > 0
oFTP:oUrl:cServer := cServer
oFTP:oUrl:cUserID := cUser
oFTP:oUrl:cPassword := cPassword
ENDIF
IF oFTP:Open( cUrl )
aFiles := Directory( "SelectAFile\*.*" )
IF Len( aFiles ) > 0
FOR EACH cFile IN afiles
? "Filename: " + cFile[ F_NAME ]
IF ! oFtp:UploadFile( cFile[ F_NAME ] )
lRetVal := .F.
EXIT
ELSE
lRetVal := .T.
ENDIF
NEXT
ENDIF
oFTP:Close()
ELSE
MsgBox( "Could not connect to FTP server " , oURL:cServer )
IF oFTP:SocketCon == NIL
cStr += hb_eol() + "Connection not initialized"
ELSEIF hb_inetErrorCode( oFTP:SocketCon ) == 0
cStr += hb_eol() + "Server response:" + " " + oFTP:cReply
ELSE
cStr += hb_eol() + "Error in connection:" + " " + hb_inetErrorDesc( oFTP:SocketCon )
ENDIF
? cStr
lRetVal := .F.
ENDIF
RETURN lRetVal
*---------------------------------------------------------------------------*
METHOD New( oUrl, xTrace, oCredentials ) CLASS TIPClientFTP
::super:new( oUrl, iif( HB_ISLOGICAL( xTrace ) .AND. xTrace, "ftp", xTrace ), oCredentials )
::nDefaultPort := 21
::nConnTimeout := 3000
::bUsePasv := .T.
::nAccessMode := TIP_RW // a read-write protocol
::nDefaultSndBuffSize := 65536
::nDefaultRcvBuffSize := 65536
// precompilation of regex for better prestations
::RegBytes := hb_regexComp( "\(([0-9]+)[ )a-zA-Z]" )
::RegPasv := hb_regexComp( "([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*) *, *([0-9]*)" )
RETURN Self
METHOD Open( cUrl ) CLASS TIPClientFTP
IF HB_ISSTRING( cUrl )
::oUrl := TUrl():New( cUrl )
ENDIF
IF Len( ::oUrl:cUserid ) == 0 .OR. Len( ::oUrl:cPassword ) == 0
RETURN .F.
ENDIF
IF ! ::super:Open()
RETURN .F.
ENDIF
IF ::GetReply()
::inetSendAll( ::SocketCon, "USER " + ::oUrl:cUserid + ::cCRLF )
IF ::GetReply()
::inetSendAll( ::SocketCon, "PASS " + ::oUrl:cPassword + ::cCRLF )
// set binary by default
IF ::GetReply() .AND. ::TypeI()
RETURN .T.
ENDIF
ENDIF
ENDIF
RETURN .F.
*---------------------------------------------------------------------------*
***
Thanks and greetings...
Re: Ftp @ in username problem
Hi all,
Can somebody please confirm the syntax error
***
main.prg(76) Error E0030 Syntax error "syntax error at 'NEW'"
main.prg(93) Error E0030 Syntax error "syntax error at 'OPEN'"
***
ik also did install 3.3.0 to be sure,
version.txt gives 3.3.0
build.log gives 3.2.0
***
Harbour 3.2.0dev (r1405061532)
Copyright (c) 1999-2014, http://harbour-project.org/" onclick="window.open(this.href);return false;
main.prg(76) Error E0030 Syntax error "syntax error at 'NEW'"
main.prg(93) Error E0030 Syntax error "syntax error at 'OPEN'"
2 errors
No code generated.
hbmk2[main]: Error: Running Harbour compiler (embedded). 1
(v:\hmg\harbour\bin\harbour.exe) -n2 main.prg -DHBMK_HAS_HMG=1 -q -oC:\Users\HP\AppData\Local\Temp\hbmk_udu5t0.dir\ -iv:\hmg\harbour\include -i. -iv:\hmg\include
***
Thanks and greetings...
Can somebody please confirm the syntax error
***
main.prg(76) Error E0030 Syntax error "syntax error at 'NEW'"
main.prg(93) Error E0030 Syntax error "syntax error at 'OPEN'"
***
ik also did install 3.3.0 to be sure,
version.txt gives 3.3.0
build.log gives 3.2.0
***
Harbour 3.2.0dev (r1405061532)
Copyright (c) 1999-2014, http://harbour-project.org/" onclick="window.open(this.href);return false;
main.prg(76) Error E0030 Syntax error "syntax error at 'NEW'"
main.prg(93) Error E0030 Syntax error "syntax error at 'OPEN'"
2 errors
No code generated.
hbmk2[main]: Error: Running Harbour compiler (embedded). 1
(v:\hmg\harbour\bin\harbour.exe) -n2 main.prg -DHBMK_HAS_HMG=1 -q -oC:\Users\HP\AppData\Local\Temp\hbmk_udu5t0.dir\ -iv:\hmg\harbour\include -i. -iv:\hmg\include
***
Thanks and greetings...
- danielmaximiliano
- Posts: 2612
- Joined: Fri Apr 09, 2010 4:53 pm
- Location: Argentina
- Contact:
Re: Ftp @ in username problem
Hello Hynan:
these new methods need to have the upper class,
compile Lib
these new methods need to have the upper class,
Code: Select all
CREATE CLASS TIPClient
METHOD New( oUrl, xTrace, oCredentials )
METHOD Open( cUrl )
ENDCLASS
METHOD New( oUrl, xTrace, oCredentials ) CLASS TIPClient
ENDCLASS
METHOD New( oUrl, xTrace, oCredentials ) CLASS TIPClient
ENDCLASS
CREATE CLASS TIPClientFTP FROM TIPClient
METHOD New( oUrl, xTrace, oCredentials )
METHOD Open( cUrl )
METHOD New2( oUrl, xTrace, oCredentials ) // You method
METHOD Open2( cUrl ) // You method
ENDCLASS
METHOD Open2( cUrl ) CLASS TIPClientFTP
RETURN .F.
METHOD New2( oUrl, xTrace, oCredentials ) CLASS TIPClientFTP
RETURN .F.
*´¨)
¸.·´¸.·*´¨) ¸.·*¨)
(¸.·´. (¸.·` *
.·`. Harbour/HMG : It's magic !
(¸.·``··*
Saludos / Regards
DaNiElMaXiMiLiAnO
Whatsapp. := +54901169026142
Telegram Name := DaNiElMaXiMiLiAnO
¸.·´¸.·*´¨) ¸.·*¨)
(¸.·´. (¸.·` *
.·`. Harbour/HMG : It's magic !
(¸.·``··*
Saludos / Regards
DaNiElMaXiMiLiAnO
Whatsapp. := +54901169026142
Telegram Name := DaNiElMaXiMiLiAnO